Audi A1 8X Front Trim Right O/S Door Mount Strip Seal Gasket Rubber 8X4831722C

Description

Audi A1 8X Front Trim Right O/S Door Mount Strip Seal Gasket Rubber is an original body component designed for installation on the outer edge of the door. This precisely profiled rubber mounting strip ensures a tight seal between the door and the body, improving protection against water, noise, and debris, while supporting stable door operation in daily use.

Specifications and technical data

• SKU: 8X4831722C
• Mark: Audi
• Condition: Used
• OEM Part Number: 8X4831722C
• Substitutable numbers: 8X4831722C, 8X4 831 722 C
• Location on the vehicle: Front, Right
• Part type: Door Seal
• Category: Door Seals

Purpose and function in the Audi body

The described sealing strip is designed for installation on the front right door, on the outer side, in the contact zone with the body. Its purpose is to:

• limit the ingress of water and moisture into the door interior and cabin,
• reduce wind noise during high-speed driving,
• stabilize the door position relative to the body pillar,
• protect the door edge from minor mechanical damage.

Thanks to its tailored profile and the appropriate hardness of the rubber, the seal works with the factory Audi door construction, supporting acoustic comfort and the proper operation of the lock and hinges.

Construction and material properties

The element is made of flexible rubber material with selected elasticity, which allows for a secure press against the body frame when the door is closed. The profiled mounting edge enables stable seating on the door rim, and the properly formed working part of the seal creates a continuous barrier against water and air.

Such a design solution:

• facilitates assembly and disassembly during service work,
• reduces the risk of leaks at the joints,
• ensures consistent adhesion after every opening and closing of the door.

Benefits of using an original door seal

Using a factory seal in the Audi A1 8X allows you to maintain the parameters specified by the vehicle manufacturer. Key advantages include:

• Precise fit to the door shape – no need for cutting or adjusting universal replacements.
• Consistency with other body elements – the seal works with existing trims, windows, and door fittings.
• Support for driving comfort – reduction of wind noise and minimization of rattling resulting from play on the door perimeter.
• Better protection against corrosion – proper water drainage from the area around the door edge and pillar.

This solution is especially recommended when replacing a damaged, perished, or deformed seal, when leaks, excessive noise, or problems with closing the door occur.

Condition, installation, and service application

The item comes from disassembly and is intended for reinstallation in a vehicle where it is necessary to replace the seal on the front right door. This type of door seal will work well both for post-accident repairs and for gradual body renovation, when the existing rubber elements have lost their operational properties.

During installation, it is recommended to:

• thoroughly clean the door edge and adjacent surfaces,
• check the condition of the hinges and lock to avoid excessive stress on the seal,
• check the fitment along the entire perimeter after closing the door.

Related elements and further information

If you are planning a comprehensive repair or upgrade of the door area in your Audi and need other elements from the same group, such as additional perimeter seals, edge strips, or rubber guide profiles, check the available parts in the Audi door seals category.

If you are also thinking about improving cabin ergonomics and comfort during longer trips, it is worth checking out the guide on seat replacement – you will find practical tips in the article Interior metamorphosis: how branded seats from disassembly improve comfort and car value.