BMW E61 LCI Rear Carrier Mount Guide Bumper Left N/S 7060795

Description

BMW E61 LCI Rear Carrier Mount Guide Bumper Left N/S is a precision mounting component designed for the rear left side of the vehicle body, responsible for the stable seating of the bumper. Thanks to its factory geometry, it ensures proper guidance and support for the bumper, which translates into an aesthetic fit of the bodywork and the correct operation of adjacent body components.

Specifications and technical data

• SKU: 7060795
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 7060795
• Substitutable numbers: 51127060795, 7060795
• Location on the vehicle: Rear, Left
• Category: Other Exterior Parts & Accessories

Purpose and function of the component

The presented bumper guide mount has been designed specifically for the rear left side of the BMW E61 series body. Its task is to:

• maintain the correct position of the bumper relative to the fender and other body panels,
• compensate for minor deformations and vibrations while driving,
• provide a stable mounting point for the bumper system in the rear area of the vehicle.

As a result, the bumper remains evenly supported, and the body lines maintain a consistent, factory-spec alignment.

Benefits of using an original BMW mount

Using an original mount in the BMW E61 allows for maintaining compliance with the factory body construction. The component is matched to the shape of the bumper and mounting points, which limits the need for additional modifications during installation. In practice, this means:

• secure fitment of the bumper to the bodywork on the rear left side,
• reduced risk of play, rattles, and unwanted vibrations,
• easier removal and reinstallation of the bumper for future repairs.

This solution is particularly beneficial for post-accident repairs, body geometry corrections, or replacing the bumper with another unit.

Vehicle placement and mounting aspects

The mount operates in the rear left area of the vehicle, where it is exposed to loads resulting from bumper movement and the influence of external factors. Proper installation of this component is important for:

• maintaining the correct gap between the bumper and the fender,
• the stability of the entire rear bumper module,
• correct transfer of forces acting on the bumper during operation.

When replacing, it is recommended to check adjacent mounting points and the condition of the bumper itself to fully utilize the potential of the newly installed mount.

Condition and service application

The item is in used condition, making it an attractive cost-effective alternative while maintaining original BMW specifications. This type of part is suitable for:

• post-accident repairs of the rear body section,
• restoring factory bumper fitment after previous unprofessional repairs,
• body and paint shops specializing in the BMW brand.

To ensure fitment, it is worth verifying compatibility by OEM number or interchangeable numbers in the vehicle’s service documentation.

Expansion of offer and technical knowledge

If you are planning a comprehensive repair or upgrade of the rear body zone in your BMW and need other components from the same group, such as additional mounts, guides, or bumper brackets, check the available parts in the Other BMW category.

If you are interested in comparing design solutions used in different brands and models, including sports versions, you can find useful information about the construction of engines, brakes, and chassis in the article Audi RS vs other models – what is hidden under the hood and chassis?, which allows for a better understanding of the differences in the design of key vehicle systems.