BMW F87 M2 F80 M3 F82 F83 M4 Swing Support Stabiliser Front Right

Description

BMW F87 M2 F80 M3 F82 F83 M4 Swing Support Stabiliser Front Right is an original BMW suspension system component, designed for the front right side of the vehicle. This used component from the Stabilisers, clamps and bushings group ensures precise guidance of the stabiliser bar and stable cooperation with other suspension elements in M-series sports models.

Specifications and technical data

• SKU: 2284644
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 2284644
• Substitutable numbers: 2284644, 31302284644
• Location on the vehicle: Front, Right
• Category: Sway Bars, Links & Bushings

Purpose and function in the suspension system

The presented stabiliser support is designed for installation in the front right part of the suspension, where it is responsible for the rigid and repeatable mounting of the anti-roll bar. A correctly selected element in this location reduces body roll in corners, improves the car’s response to steering inputs, and supports driving stability at higher speeds.

In vehicles with sports characteristics, such as the M2, M3, or M4, the proper operation of the stabiliser support is of particular importance for maintaining predictable car behavior during dynamic braking, rapid lane changes, and driving over uneven surfaces. Thanks to the appropriate mounting geometry, it is possible to maintain consistent operation of the entire suspension system without unwanted play.

Benefits of using an original BMW support

Using an original stabiliser support in BMW M-series models allows for maintaining factory suspension performance parameters, which is essential both in daily use and during track driving. Key advantages include:

• maintaining the correct geometry of the stabiliser mounting on the front axle,
• consistent cooperation with factory bushings, clamps, and other suspension group elements,
• reducing the risk of improper fitment, typical for aftermarket parts with imprecise dimensions,
• maintaining predictable vehicle handling characteristics in accordance with the manufacturer’s specifications.

A used, original element of this class is a reasonable choice for users who want to combine repair cost control with maintaining high quality and compatibility with the factory suspension system.

Selection, installation, and technical aspects

The stabiliser support intended for installation on the front right side should always be selected for the specific body model and suspension version. In practice, this means verifying compatibility with BMW service documentation and comparing the design of the element with the part removed from the vehicle. This approach minimizes the risk of incorrect selection and accelerated wear of adjacent components.

During installation, it is important to maintain the correct tightening sequence and apply appropriate torque values in accordance with the manufacturer’s guidelines. A correctly installed stabiliser support:

• eliminates unwanted play in the stabiliser bar mounting,
• reduces knocks and vibrations transmitted to the body,
• supports even load distribution between the left and right sides of the axle.

As a result, the driver receives more consistent, predictable car behavior, which is important for both safety and driving comfort.

Application area and system expansion

The stabiliser support works in the immediate vicinity of other elements responsible for front wheel guidance, such as stabiliser links, bushings, or mounting clamps. When replacing this component, it is worth conducting a comprehensive assessment of the entire front axle suspension zone to avoid a situation where a new element works with worn-out sub-assemblies.

If you are planning a comprehensive repair or upgrade of the suspension zone in your BMW and need other elements from the same group, such as stabilisers, clamps, or bushings, check the available parts in the BMW Stabilisers, clamps and bushings category.

Expert support and cost optimization

When working with brake and suspension system elements, many users look for ways to reduce service costs without compromising safety. For components from the brake caliper group, a specialist guide describing the selection and operation of recycled parts may be helpful – you can find more practical tips in the article “Brake calipers under the microscope: How to effectively reduce brake system repair costs by choosing proven recycled parts”.

If you want to better understand the relationships between shock absorbers, control arms, and stabilisers, and the impact of these sub-assemblies on car handling, it is worth reaching for a guide material dedicated to suspension – you can find a practical discussion in the entry “Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilisers”.

Summary

BMW F87 M2 F80 M3 F82 F83 M4 Swing Support Stabiliser Front Right is an original, used element designed for the front right side of the suspension in BMW sports models. It ensures proper stabiliser mounting, supports body stability in corners, and allows for maintaining factory vehicle handling characteristics. This is a practical solution for drivers who expect a solid, compatible component while controlling suspension repair costs.