Description
Visual condition of the part
The product shows signs of use visible in the photos.
BMW X5 E70 X6 E71 Front Wheel Alloy Rim 20″ Y-spoke 214 10J ET:40 is an original front alloy rim with the distinctive Y-spoke design, intended for BMW X5 E70 and X6 E71 models. Thanks to its robust construction and precise geometric parameters, it serves as a functional service solution when replacing a damaged rim or configuring a wheel set. This is a used item from the Rims category, which allows you to maintain the factory handling characteristics and appearance of the vehicle.
Specifications and technical data
- SKU: 6772249-7
- Mark: BMW (Genuine OE)
- Condition: Used
- OEM Part Number: 6772249
- Substitutable numbers: 36116772249, 6772249
- Location on the vehicle: Front
- Rim diameter: 20″
- Rim width: 10
- Offset (ET): 40
- Hole diameter: 120
- Number of holes: 5
- Rim material: Aluminium
- Category: Rims
Purpose and compatibility
The presented rim has been designed as a front wheel for the BMW X5 E70 and BMW X6 E71, in accordance with the manufacturer’s original design specifications. The Y-spoke 214 design ensures stylistic consistency with the original equipment packages of these models, while also enabling seamless integration with the vehicle’s chassis and braking system.
By maintaining the original mounting parameters, the rim is suitable for use both as a replacement for a single damaged rim and as a component for completing a full set of front wheels in an OEM configuration.
Construction and technical properties
The rim is made of a lightweight aluminum alloy, which helps reduce unsprung mass and improves suspension response to road irregularities. The applied diameter, width, offset, bolt pattern, and center bore have been selected in accordance with the requirements of the front axle in the X5 E70 and X6 E71, which translates into:
- proper wheel seating in the wheel arch,
- stable handling at higher speeds,
- appropriate cooperation with factory tires and the steering system.
The Y-spoke 214 design ensures good ventilation of the brake zone, which promotes heat dissipation from the discs and pads during intensive use.
Service application and operation
The rim from the Rims category will prove useful in situations where it is necessary to replace a single rim after mechanical damage or to restore a complete, factory-original set of wheels on the front axle. The used nature of the product allows for an economical restoration of the original configuration without the need to resort to expensive non-factory replacements.
Before installation, it is recommended to perform a standard service inspection of the rim (checking for runout, airtightness, and the condition of the surface for the tire and lug nuts) to ensure safe and long-term operation in daily use.
Rim selection and technical support
To ensure that the presented rim will work properly with your BMW X5 E70 or X6 E71, it is worth verifying the compatibility of the parameters with the vehicle documentation or the data from the wheel identification plate. It may also be helpful to compare it with the currently installed rim on the front axle.
If you want to better understand what to look for when buying light-alloy rims, check out our guide Used rims like new: a guide to buying and refurbishing alloy wheels, where you will find practical tips on assessing the condition and possibilities for refurbishing alloy wheels.
In a situation where you are selecting a part by OEM number or other manufacturer markings, the following practical material will also be helpful: Guide: how to select the right car part by VIN and OEM number, which describes the part compatibility verification process step by step.
Expanding your BMW wheel configuration
If you are planning a comprehensive repair or upgrade of the wheel and tire area in your BMW and need other components from the same group, such as additional rims, rims with a different design, or rims for a second set of seasonal tires, check out the available parts in the BMW Rims category.
Reviews
There are no reviews yet.