Ford Kuga MK1 Driveshaft Rear Left Right N/O/S 2.0 TDCi 4×4 1565594

Description

Ford Kuga MK1 Driveshaft Rear Left Right N/O/S 2.0 TDCi 4×4 is a used, original driveshaft designed for the rear axle in 4×4 versions. This component is responsible for the stable transfer of torque to the rear wheels, which is crucial for traction and predictable vehicle handling. Thanks to its factory Ford design, it ensures a precise fit to the drivetrain without the need for modifications.

Specifications and technical data

• SKU: 1565594
• Mark: Ford
• Condition: Used
• OEM Part Number: 1565594
• Substitutable numbers: 1565594, AG9N-4B402-AA, AG9N4B402AA
• Location on the vehicle: Rear, Right, Left
• Category: Driveshafts

Purpose and vehicle placement

The presented driveshaft is designed for installation on the rear axle of the first-generation Ford Kuga with a 2.0 TDCi engine and 4×4 drive. The design is intended for use on both the left and right sides, which facilitates part selection when servicing the drivetrain. This solution allows for flexible use of the component depending on the axle configuration and the requirements of the specific vehicle.

Technical characteristics of the driveshaft

The shaft belongs to the Driveshafts category, meaning it is an integral part of the drivetrain between the differential and the wheels. It is responsible for:

• transferring torque while maintaining appropriate torsional rigidity,
• compensating for suspension movements during driving,
• maintaining the correct geometry of the drivetrain under variable loads.

Thanks to its factory geometry and the use of original Ford design solutions, the shaft works correctly with the stock differential, hubs, and suspension components, minimizing the risk of vibrations and unwanted play.

Benefits of using an original Ford driveshaft

Choosing a used, original Ford driveshaft for the Kuga MK1 allows you to maintain the integrity of the entire drivetrain. The main advantages of this solution include:

• Factory fit – dimensional and structural compatibility with the intended mounting location on the rear axle.
• Consistent operation with the stock 4×4 drive – no need for adaptations or modifications.
• Ability to use existing mounting points and factory assembly solutions.

For users operating a Ford Kuga in demanding conditions (city, highway, poor road surfaces), a correctly selected driveshaft translates into stable handling, predictable drivetrain operation, and reduced risk of additional stress on the differential and wheel hubs.

Application in drivetrain service and diagnostics

This driveshaft model is suitable for both standard replacement of a worn component and more extensive drivetrain service in the Ford Kuga MK1. It is particularly useful in situations where the following occur:

• knocking or vibrations from the rear of the vehicle during acceleration,
• uneven operation of the 4×4 drive,
• excessive play in the drivetrain connections at the rear axle.

Selecting an original Ford driveshaft reduces diagnostic and installation time because the component is structurally compliant with the manufacturer’s factory specifications.

If you are planning a comprehensive repair or upgrade of the drivetrain area in your Ford and need other components from the same group, such as additional shafts, half-shafts, or parts working with the differential, check out the available parts in the Ford Driveshafts category.

Expert support and selection of used drivetrain components

When working with used drivetrain components, it is worth paying attention to signs of wear, correct selection for the specific engine and drive version, and the general mechanical condition of the part. Practical tips on evaluating differentials, axles, sensors, and other drivetrain components can be found in the guide Second-hand differential – what you need to know about used differentials, sensors, and drivetrain systems, which helps you plan repairs consciously and avoid costly mistakes.